DGS-1000 series electromagnetic flowmeter is a fully intelligent flowmeter developed by our company using the most advanced technology at home and abroad, with high measurement accuracy, stability, and reliability; In the process of product structure, material selection, manufacturing process, production assembly, and factory testing, there are eighteen core process steps that are meticulous and strict. The core technologies include: independent research and development and production of high-precision electronic converters, unique small flow measurement technology, IP68 fully waterproof process, long lifespan of low-power batteries, high precision, and maintenance free advantages.
Degao Environment's Intelligent Industry 4.0 production control system and the national blind spot free and considerate after-sales service system provide systematic solutions for various high-end customers.
1. Application Scenarios
● Zoning metering, secondary water supply
● Large user trade settlement
● Chemical Industry
● Sewage industry
● Food hygiene industry
● Biopharmaceutical industry
2. technical characteristics
3. Overall dimensions and nominal pressure
4.Advantages of DGS-1000 series pipe section electromagnetic flowmeter
◆ High precision: •0.2% •0.3% •0.5%;
◆ High reliability;
◆Special food grade lining made by Degao Company
◆ With pressure measurement, synchronous collection and flow analysis; The core circuit board adopts low-noise and high-precision components of military quality, which can maintain high-precision measurement at low flow rate for a long time;
◆ Can be positive and negative bidirectional metering, suitable for multi-channel water inlet area;
◆ Support 0.005m/s ultra-low flow rate measurement (customized for partition measurement), small flow measurement is very good, is the preferred product for high-end trade settlement;
◆ Super anti-interference: unique two-stage shielding technology, can install pump room;
◆ Long life of lithium battery;
◆ Optional meter reading mode: •4G • NB-IoT • RS-485;
◆ Meter reading frequency can be flexibly customized according to customer requirements;
◆ Every change is reported: voltage and power, water limit, mutation, not full tube can be every change alarm;
◆ Submersible design of the whole machine;
5. Main technical parameters
accuracy | 0.2级、0.3级、0.5级 |
repeatability | 0.06%、0.09%、0.15% |
Measuring fluid | Conducting fluid |
Electric conductivity | ≥10μS/cm |
Measured velocity range | 0.3-12m/s |
Output signal | The standard output signal is pulse/frequency output, and the output available is 4~20mA, isolated RS485 digital communication interface |
Power supply | 220VAC/24VDC/ 3.6VDC Lithium battery/Lithium battery + Solar battery/Lithium battery +220VAC |
Sensor aperture | DN15-DN3000 |
Working pressure | DN15-DN80 (4. 0 MPa) , DN100-DN150 (1.6 MPa) , DN200-DN1000 ( 1. 0MPa),DN1200-DN3000(0.6MPa) |
Ambient temperature | -25℃~60℃, humidity is 5%~90% |
Operating medium temperature | ≤70℃ (Neoprene CR, Polyurethane rubber PU), ≤120℃ (polytetrafluoroethylene F4 (PTFE), polyperfluorinated ethylene propylene F46 (FEP), ceramics, etc.) |
Class of protection | IP67/IP68 |
Electrode structure | Standard electrode: 2 electrodes (≤DN700); 4 electrodes (≥DN800) |
Electrode material | Selected according to the measured medium, there are 316L stainless steel, Hastelloy B, Hastelloy C, tantalum, titanium, platinum, ceramics, etc |
shell | Painted steel or stainless steel case |
Installation form | A type sensor and transducer are mounted together; Separate sensor and converter (with 5m standard cable) |
6.tube section type electromagnetic flowmeter measuring range